You can use Android Debug Bridge (ADB) to connect your Fire tablet to your computer for testing and debugging. You connect your computer to your Fire tablet through a micro-USB cable.

Android Debug Bridge (ADB) is a command-line utility for running and managing Android apps on your device or emulator. For more information and instructions on using ADB, see Android Debug Bridge.

If you're looking for instructions on connecting to a Fire TV instead, see Connect to Fire TV Through ADB.

• Check for Device Connections Using ADB (Optional)
• Troubleshooting

Step 1: Enable Developer Options

1. Go to Settings > Device Options and look for a Developer Options menu. If it's not there, do the following:

   a. Go to Settings > Device Options > About Fire Tablet.b. Tap your Serial Number seven times.c. Return to Device Options. A new menu appears called 'Developer Options.'

2. Tap Developer options. (2013 models might call this option 'Security.')
3. Set Developer options and USB debugging to ON.

2019-04-01 Installation and usage guide of the new generic USB DAC driver for FiiO players & DAC.pdf. 끂 51699 965.21 KB. 2019-04-01 SAMSUNGUSBDriverforMobilePhones1590.exe. 끂 18145 23.06 MB. 2019-04-01 Instruction of installing MTP driver on Windows.pdf. Hi all, HP Probook 4530s windows 10 looking for drivers for this hardware ID: USB VID138A&PID003C&REV0086 USB VID138A&PID003C I think its for the finger print scanner, any help will much appreciated.

• If you have a Kindle Fire 1st Generation, ADB is enabled by default.

Step 2: Install the Kindle Fire Driver (Windows Only)

1. If you're using Windows, download this Kindle Fire driver: kindle_fire_usb_driver.zip.
2. After downloading the file, extract the contents into a new folder and double-click the Fire_Devices ABD drivers file.
3. Proceed through the installation wizard screens to install the driver.

Step 3: Install Android Studio

ADB is available on your computer when you install Android Studio. If you don't already have Android Studio, download and install Android Studio. If you're not using Android Studio, you need to download and install Android SDK platform tools.

Step 4: Connect Your Fire Device to Your Computer with a USB Cable

1. Using a USB cable, connect your Fire tablet to a USB port on your computer.

   Note that Fire tablets can treat the USB with different transfer options. After connecting the USB cable, swipe down from the top of your tablet to see the USB option used. You might see various notifications, including the USB connection type that was used when you connected the cable. The relevant notification is highlighted in the screenshot below.

   If you don't see 'Connected as Media Device', press Tap for other USB options. Then select Media device (MTP). Later Fire OS versions have a different interface here. If you're using Fire OS 7, select File Transfer.

   Note: If your USB is connected as a Camera (PTP), Android Studio won't recognize the tablet as a device in Android Studio.

   If you don't see the USB connection type in the above notifications, go to Settings > Device Options > Developer Options > USB computer connection. Set this to Media device (MTP). For Fire OS 7, select File Transfer.

2. When the Allow USB debugging? dialog appears on your tablet, tap OK.

3. Open Android Studio and look for the device to appear in devices drop-down menu:

   The device's name will use the android.os.Build.MODEL property for the device. KFSUWI refers to Fire HD 10 (2017) tablet. You can see a list of build model names in the Identifying Fire Tablet Devices.

   If you have not selected the 'Allow USB Debugging' dialog on your tablet, the name 'Unknown device' will appear in the devices drop-down menu in Android Studio until you allow debugging.

4. With the tablet connected, you can now run your app on your tablet by clicking the Run App button in Android Studio.

If you run into issues, see the Troubleshooting section below.

Check for Device Connections Using ADB (Optional)

Instead of looking in the devices menu in Android Studio, you can also use some ADB terminal commands to confirm that your device is connected. ADB is useful for performing many other operations as well, such as entering sandbox mode or installing other assets. Follow these two sections:

If you skip adding ADB to your PATH, you can also Check for Connected Devices If ADB Isn't In Your PATH.

Add ADB to Your PATH

First, add ADB to your PATH so you can more easily run ADB commands. (Your PATH is an environment variable used to specify the location of the program's executable. If you don't add ADB to your PATH, running ADB commands will require you to browse to the <Android SDK>/platform-tools directory to run adb.)

To add ADB to your PATH on Mac:

1. Get the path to your Android SDK platform-tools directory:

   1. Open Android Studio and click the SDK Manager button .The location to your Android SDK appears near the top next to Android SDK Location. For example: /Users/<your username>/Library/Android/sdk

      If this is your first time opening Android Studio, there isn't an SDK Manager button. Instead, at the Welcome to Android Studio prompt, click Configure > SDK Manager and provide the location to the Android SDK.

   2. Copy the path to the SDK and paste it somewhere convenient, such as a text editor.
   3. Add /platform-tools to the end of the path you copied in the previous step. ('platform-tools' is the directory containing the ADB executable.)
   4. Copy the full path to your clipboard.

2. Use the following command to add ADB to your .bash_profile. Replace <your username> with your actual username. Also, make sure the path points to your Android SDK.

   Your .bash_profile file is usually in your user directory, which you can find by typing cd ~ (change to your user directory). Then type ls -a (list all) to show all files, including hidden ones.

   If the file isn't there, simply create one. You can then type open .bash_profile to see the paths listed.

   After you add this PATH to your bash profile, you should see the following in your .bash_profile file:

   (Only instead of johndoe, you will see your own username.)

3. Fully restart any terminal sessions, and then type adb. If you successfully added ADB to your path, you will see ADB help info rather than 'command not found.'

To add ADB to your PATH on Windows:

1. Get the path to your Android SDK platform-tools directory:

   1. Open Android Studio and click the SDK Manager button .

      The location to your Android SDK appears near the top next to Android SDK Location. For example: C:Users<your user name>AppDataLocalAndroidSdk

      If this is your first time opening Android Studio, there isn't an SDK Manager button. Instead, at the Welcome to Android Studio prompt, click Configure > SDK Manager and provide the location to the Android SDK.

   2. Copy the path to the SDK and paste it somewhere convenient, such as a text editor.
   3. Add /platform-tools to the end of the path you copied in the previous step. ('platform-tools' is the directory containing the ADB executable.)
   4. Copy the full path to your clipboard.
2. Click your computer's search button (next to Start) and type view advanced system settings.
3. Click View advanced system settings.
4. When the System Settings dialog opens, click the Environment Variables button.
5. Under System Variables (the lower pane), select Path and click Edit.

6. Do one of the following:

   • On Windows 7 or 8, move your cursor to the farthest position on the right, type ; and then press Ctrl+V to insert the path to your SDK that you copied earlier. It may look like this: ;C:Users<your user name>AppDataLocalAndroidSdkplatform-tools. Click OK on each of the three open dialog boxes to close them.
   • On Windows 10, click the New button and add this location.
7. Restart any terminal sessions, and then type adb. If you successfully added ADB to your path, you will see ADB help info rather than 'command not found.'

Check for Connected Devices

1. Assuming ADB is added to your PATH, run the following commands:

2. Confirm that the serial number for your Fire tablet appears in the list of devices. For example:

   On your tablet, your device's serial number is located under Settings > Device Options.

Check for Connected Devices If ADB Isn't In Your PATH

If your terminal doesn't recognize adb as a command (that is, you didn't add ADB to your PATH), you might have to run the commands from the SDK directory that contains ADB.

1. In Android Studio go to Tools > SDK Manager.
2. In the SDK Manager dialog box, copy the Android SDK Location.

3. Browse to this location in your terminal or command prompt. For example:

   Mac

   Windows

   Then go into the platform-tools directory:

   The platform-tools directory contains adb.

4. Now run the ADB commands as follows:

   Mac:

   Windows:

   The response should list your device's serial number. For example:

   If your Fire tablet is still not detected, you may need to reboot your computer or log out and back in for the changes to take effect.

Troubleshooting

Tablet doesn't appear in list of devices in Android Studio

1. If you don't see your tablet device in the list of devices in Android Studio, click the devices drop-down menu and select Troubleshoot device connections:

2. Click Rescan devices.

   If rescanning devices doesn't detect your Fire tablet as a device, your micro-USB cable might be bad, you might have the wrong USB connection type (e.g, camera instead of media device), or you might not have enabled USB debugging. You can also try restarting your computer and the tablet.

Uninstall the non-ADB Driver (Windows)

If you previously connected a Fire tablet without first enabling ADB on the Fire tablet, you might need to remove the existing USB device driver and force re-installation of the driver. To remove the non-ADB driver:

1. Using a micro-USB cable, connect your Fire tablet to a USB port on your computer.
2. On your computer (Windows 10), click the search button (next to the Start menu) and type Device Manager in the search. Then select it in the results. (Other Windows versions have different options for accessing the Control Panel.)
3. In the Device Manager window, expand Portable Devices.
4. Right-click the Fire device and then click Properties.
5. In the Properties window, on the Driver tab, click Uninstall, and then Confirm.
6. Unplug your Fire tablet from your computer.

Confirm the Fire Driver Is Installed Correctly

You can confirm that the Fire driver is installed correctly by doing the following:

1. On your computer, click the search button search button (next to the Start menu) and type Device Manager.

2. In Device Manager, under Fire Devices, verify that that a device appears called Android Composite ADB Interface.

   If your Device Manager shows an Other Devices section with a second Fire device with a yellow alert sign, your computer is listing Amazon's unrecognized ADB module as a separate device. To fix this issue:

   1. Under Other Devices, right-click the Fire device and select Properties.
   2. On the Driver tab of the Properties window, select Update Driver…
   3. Choose to browse for the driver software, then navigate to Let me pick from a list of device drivers on my computer > Show All Devices > Have Disk.
   4. Navigate to the folder where you installed the Amazon driver (typically C:Program Files (x86)Amazon.comFire_DevicesDrivers) and select it.

   5. Ignore the warning regarding installing drivers and proceed.

      You should now correctly see your Fire tablet with the ADB driver installed.

Last updated: Oct 29, 2020

Note: the operation of WinTV under Windows requires two pieces: a WinTV driver and a WinTV application (the WinTV application is available below in 'Latest WinTV Application' section). You cannot run the application without loading the driver.

Latest driver for the WinTV-USB, WinTV-USB-FM and USB-Live for laptop and desktop PC's using USB 1.1 or USB 2.0 This driver will remove and replace any older WinTV-USB driver.

To install:

1. Download this file (wintvusb_264_23189.exe) and save it to a directory you will remember (for example: C:)
2. Run wintvusb_264_23189.exe. This will unpack the driver and start the driver installation. You do not have to remove the WinTV-USB.
3. Halfway through the installation you will be asked to Reboot. Do so to continue the driver installation.
4. After rebooting, Windows will display a 'New Hardware Found' message, and then go on to install this updated driver.
5. Now, download and install the WinTV application (see below).

New features:

This driver fixes problems with SoftPVR on some PCs and laptops.

This driver supports better video quality on some VGA cards by using 'VMR'. To turn this on, click Windows Start / Programs / Hauppauge WinTV / Primary and then select 'Allow VMR'.

If your VGA card does not support VMR, then chose 'Allow Overlay'.

This driver supports either analog audio into your PC, or audio over the USB bus.

Audio over USB is simpler to connect, but analog audio through the supplied 'Audio cable' into a sound card gives higher quality audio sound. Most desktop PC's and some laptop computers have a jack on their soundcard marked 'Line In'. If your PC or laptop has a 'LineIn' jack, we recommend connecting the WinTV-USB's 'analog audio output' to your sound card.

This driver supports either analog audio into your PC, or audio over the USB bus. Audio over USB is simpler to connect, but analog audio into a sound card gives higher quality audio sound. Most desktop PC's and some laptop computers have a jack on their soundcard marked 'Line In'. If your PC or laptop has a 'LineIn' jack, we recommend connecting the WinTV-USB's 'analog audio output' to your sound card.

To switch between digital and analog audio, on the WinTV2000 application click 'Menu', then 'Audio Type' and then select:

• Analog Rec+Live: audio goes over the supplied Audio cable to your PC or laptop's 'Line In' jack
• Digital Rec/Analog Live: While watching live TV, audio goes over the supplied Audio cable. While recording, audio goes over the USB cable.
• Digital Rec+Live: audio goes over the USB cable while watching Live TV and while recording. This mode should be used if your PC or laptop DOES NOT have a Line In jack.

Name: wintvusb_264_23189.exe
Version: 2.64_23189.exe
Updated: July 1, 2005

WinTV2000 application

To install, copy this file to a temporary directory on your local disk. Then run wintv2k_412_24054.exe, which will install the new WinTV2000 application.
For support of the new Hauppauge remote control and the Hauppauge IR RemoteBlaster, use the latest IR Remote Control and IRBlaster Setup program. (found in the Accessories section of this page).

Name: wintv2k412_24054.exe
Size: 2.5 Mb
Updated: Jan. 11, 2006

WinTV Radio application for use with WinTV version 6

Notes:

• this application runs with WinTV version 6 on WinTV boards equipped with FM radio
• WinTV v7 has a built-in FM radio application

To install, download to a temporary directory and run RADIO32.EXE
New features include 30 presets and local/distance reception. Also, name radio stations by creating a preset and then clicking on the freq display and typing in the string you want.
Click here to see instructions on using the new WinTV Radio32 application.

Name: radio32_154_26154.exe
Version: 1.54
Size: 340 KB
Updated: June 3, 2008

WinTV-Scheduler update

None at this time

None at thie time.

What operating system can my 'WinTV-USB' be installed under?

Minimum System Requirements to Install WinTV-USB

• 733Mhz Pentium or faster
• Windows 98, WindowME, Windows2000 or WindowsXP
• Sound card with LINE IN

Configuring audio

WinTV-USB (model 400xx)
This default setting requires the supplied double ended stereo cable to be connected from the Line-Out on the WinTV-USB to the Line-In on your sound card.

WinTV-USBpro (model 402xx)
The usb pro can use either analog or digital audio. To use analog audio use the supplied double ended stereo cable to be connected from the Line-Out on the WinTV-USB to the Line-In on your sound card.

WinTV-USB Pro, Enabling Audio over USB
NOTE: To use digital audio do not connect the audio cable between the wintv and your sound card
After you complete the WinTV-USB driver installation, the default Audio setting is Digital Rec/Analog live. This means that digital audio when recording and analog audio when watching live TV. Digital audio is audio sent over the USB cable, while analog audio is audio sent via the audio cable from the WinTV-USB to the sound card in your laptop.
You can see the Audio setting by clicking the Menu button in WinTV:

You can see the Audio setting by clicking the Menu button in WinTV:

To enable the audio over USB when watching live TV, click on the Menu button and go to Audio Type and select Digital Rec+Live.

Last, you will be asked to Restart the WinTV application to have the changes take effect.

Causes for System Lockups

Black Screen in WinTV

There is no Audio from the WinTV-USB (analog audio)

First, be sure that the supplied audio cable is connected from the WinTV USB to the Sound Cards LINE-IN. NOTE: On some systems that do not have an actual 'line in', substitute 'Auxiliary'(AUX), or 'Microphone'(Mic) for the configuration procedures below.

In the WinTV USB Application, under CONFIGURE- AUDIO, be sure that the MIXER-ID list shows 'Line-in', that MUTE is not checked, and that the volume is up.

Also, in the sound card volume configuration (under PROGRAMS- ACCESSORIES-ENTERTAINMENT-VOLUME CONTROL), be sure that the LINE-IN section is not on MUTE (as it commonly is on default) and that the volume is up.If there is no “Line-in” section on your mixer, go to OPTIONS / PROPERTIES and check “Playback” and then check “Line-in” in the 'Show the following Volume Controls:' box below. This will add the “Line-in” section to your mixer. When adding a section to your mixer, it will usually added with the MUTE box checked, so be sure to uncheck this box.

NOTE: The WinTV USB provides MONO audio only.

Error Messages when attempting to run WinTV32 or WinTV2000

Can I view Closed Captioning data with the WinTV-USB?

The audio is not recorded when I capture video (analog audio)

It is actually the Sound Card that will capture the Audio portion when using WinTV.

If you do not record the Audio when you are capturing Video Clips, you want to make sure that the sound card's Line In mixer is setup to Record audio. Sometimes they are set for Playback only. To Check this, click on Start - Accessories - Entertainment (or Multimedia), in the Windows Volume Control, go to Options then Properties. In here click on the Recording Bullet. Below you should see the Mixers that are set to record make sure that the Line In is checked and click on OK. Then make sure that it is not muted. Xshock driver for usb shock joystick. Try to record some audio through the Line In jack using Windows' Sound Recorder. This program is found in the Multimedia group.

If you can record audio using the Sound Recorder, then you should be able to capture audio with the capture program.

Prodinfo: get information on your Hauppauge TV tuner

Usb Vid_138a&pid_003c&rev_0086 Windows 10 Driver

Mother butler guild handbook. Prodinfo.exe is a program you can run which will extract information about the WinTV product you have installed such as model and serial number, MAC address, revision, and features which can be used to identify the exact model of your product. The driver for the device must be installed in order to run Prodinfo.exe

HCWClear: remove the Hauppauge driver and applications from your PC

Usb Vid_138a 26pid_003c 26rev_0086 Windows 10 Drivers

HCWCLEAR.exe is a program you run to remove all driver and files that were installed with the installation of the WinTV program.